VISIT COUNTER

Monday, 28 December 2015

KINEMATICS AND EQUATIONS

Kinematics, branch of physics and a subdivision of classical mechanics concerned with the geometrically possible motion of a body or system of bodies without consideration of the forces involved (i.e., causes and effects of the motions).
A brief treatment of kinematics follows. For full treatment, see mechanics.
Kinematics aims to provide a description of the spatial position of bodies or systems of material particles, the rate at which the particles are moving (velocity), and the rate at which their velocity is changing (acceleration). When the causative forces are disregarded,motion descriptions are possible only for particles having constrained motion—i.e., moving on determinate paths. In unconstrained, or free, motion, the forces determine the shape of the path.
For a particle moving on a straight path, a list of positions and corresponding times would constitute a suitable scheme for describing the motion of the particle. A continuous description would require a mathematical formula expressing position in terms of time.
When a particle moves on a curved path, a description of its position becomes more complicated and requires two or three dimensions. In such cases continuous descriptions in the form of a single graph or mathematical formula are not feasible. The position of a particle moving on a circle, for example, can be described by a rotating radius of the circle, like the spoke of a wheel with one end fixed at the centre of the circle and the other end attached to the particle. The rotating radius is known as a position vector for the particle, and, if the angle between it and a fixed radius is known as a function of time, the magnitude of the velocity and acceleration of the particle can be calculated. Velocity and acceleration, however, have direction as well as magnitude; velocity is always tangent to the path, while acceleration has two components, one tangent to the path and the other perpendicular to the tangent.

Kinematic Equations and Problem-Solving

The four kinematic equations that describe the mathematical relationship between the parameters that describe an object's motion were introduced in the previous part of Lesson 6. The four kinematic equations are:
In the above equations, the symbol d stands for the displacement of the object. The symbol t stands for the time for which the object moved. The symbol a stands for the acceleration of the object. And the symbol v stands for the instantaneous velocity of the object; a subscript of i after the v (as in vi) indicates that the velocity value is the initial velocity value and a subscript of f (as in vf) indicates that the velocity value is the final velocity value.

Problem-Solving Strategy

In this part of Lesson 6 we will investigate the process of using the equations to determine unknown information about an object's motion. The process involves the use of a problem-solving strategy that will be used throughout the course. The strategy involves the following steps:
  1. Construct an informative diagram of the physical situation.
  2. Identify and list the given information in variable form.
  3. Identify and list the unknown information in variable form.
  4. Identify and list the equation that will be used to determine unknown information from known information.
  5. Substitute known values into the equation and use appropriate algebraic steps to solve for the unknown information.
  6. Check your answer to insure that it is reasonable and mathematically correct.
The use of this problem-solving strategy in the solution of the following problem is modeled in Examples A and B below.


 

Example Problem A

Ima Hurryin is approaching a stoplight moving with a velocity of +30.0 m/s. The light turns yellow, and Ima applies the brakes and skids to a stop. If Ima's acceleration is -8.00 m/s2, then determine the displacement of the car during the skidding process. (Note that the direction of the velocity and the acceleration vectors are denoted by a + and a - sign.)
The solution to this problem begins by the construction of an informative diagram of the physical situation. This is shown below. The second step involves the identification and listing of known information in variable form. Note that the vf value can be inferred to be 0 m/s since Ima's car comes to a stop. The initial velocity (vi) of the car is +30.0 m/s since this is the velocity at the beginning of the motion (the skidding motion). And the acceleration (a) of the car is given as - 8.00 m/s2. (Always pay careful attention to the + and - signs for the given quantities.) The next step of the strategy involves the listing of the unknown (or desired) information in variable form. In this case, the problem requests information about the displacement of the car. So d is the unknown quantity. The results of the first three steps are shown in the table below.
 
Diagram:Given:Find:
vi = +30.0 m/s
vf = 0 m/s

a = - 8.00 m/s2
d = ??

The next step of the strategy involves identifying a kinematic equation that would allow you to determine the unknown quantity. There are four kinematic equations to choose from. In general, you will always choose the equation that contains the three known and the one unknown variable. In this specific case, the three known variables and the one unknown variable are vf, vi, a, and d. Thus, you will look for an equation that has these four variables listed in it. An inspection of the four equations above reveals that the equation on the top right contains all four variables.
 vf2 = vi2 + 2 • a • d
 
Once the equation is identified and written down, the next step of the strategy involves substituting known values into the equation and using proper algebraic steps to solve for the unknown information. This step is shown below.
(0 m/s)2 = (30.0 m/s)2 + 2 • (-8.00 m/s2) • d
0 m2/s2 = 900 m2/s2 + (-16.0 m/s2) • d
(16.0 m/s2) • d = 900 m2/s2 - 0 m2/s2
(16.0 m/s2)*d = 900 m2/s2
d = (900 m2/s2)/ (16.0 m/s2)
d = (900 m2/s2)/ (16.0 m/s2)
d = 56.3 m
The solution above reveals that the car will skid a distance of 56.3 meters. (Note that this value is rounded to the third digit.)
The last step of the problem-solving strategy involves checking the answer to assure that it is both reasonable and accurate. The value seems reasonable enough. It takes a car a considerable distance to skid from 30.0 m/s (approximately 65 mi/hr) to a stop. The calculated distance is approximately one-half a football field, making this a very reasonable skidding distance. Checking for accuracy involves substituting the calculated value back into the equation for displacement and insuring that the left side of the equation is equal to the right side of the equation. Indeed it is!



 

Example Problem B

Ben Rushin is waiting at a stoplight. When it finally turns green, Ben accelerated from rest at a rate of a 6.00 m/s2 for a time of 4.10 seconds. Determine the displacement of Ben's car during this time period.
Once more, the solution to this problem begins by the construction of an informative diagram of the physical situation. This is shown below. The second step of the strategy involves the identification and listing of known information in variable form. Note that the vi value can be inferred to be 0 m/s since Ben's car is initially at rest. The acceleration (a) of the car is 6.00 m/s2. And the time (t) is given as 4.10 s. The next step of the strategy involves the listing of the unknown (or desired) information in variable form. In this case, the problem requests information about the displacement of the car. So d is the unknown information. The results of the first three steps are shown in the table below.
Diagram:Given:Find:
vi = 0 m/s
t = 4.10 s

a = 6.00 m/s2
d = ??

The next step of the strategy involves identifying a kinematic equation that would allow you to determine the unknown quantity. There are four kinematic equations to choose from. Again, you will always search for an equation that contains the three known variables and the one unknown variable. In this specific case, the three known variables and the one unknown variable are t, vi, a, and d. An inspection of the four equations above reveals that the equation on the top left contains all four variables.
 
 d = vi • t + ½ • a • t2

Once the equation is identified and written down, the next step of the strategy involves substituting known values into the equation and using proper algebraic steps to solve for the unknown information. This step is shown below.
d = (0 m/s) • (4.1 s) + ½ • (6.00 m/s2) • (4.10 s)2
d = (0 m) + ½ • (6.00 m/s2) • (16.81 s2)
d = 0 m + 50.43 m
d = 50.4 m
The solution above reveals that the car will travel a distance of 50.4 meters. (Note that this value is rounded to the third digit.)
The last step of the problem-solving strategy involves checking the answer to assure that it is both reasonable and accurate. The value seems reasonable enough. A car with an acceleration of 6.00 m/s/s will reach a speed of approximately 24 m/s (approximately 50 mi/hr) in 4.10 s. The distance over which such a car would be displaced during this time period would be approximately one-half a football field, making this a very reasonable distance. Checking for accuracy involves substituting the calculated value back into the equation for displacement and insuring that the left side of the equation is equal to the right side of the equation. Indeed it is!
The two example problems above illustrate how the kinematic equations can be combined with a simple problem-solving strategy to predict unknown motion parameters for a moving object. Provided that three motion parameters are known, any of the remaining values can be determined. In the next part of Lesson 6, we will see how this strategy can be applied to free fall situations. Or if interested, you can try some practice problems and check your answer against the given solutions.




 

UNIT AND DIMENSION

Dimensions, Units, Conversion Factors, and Significant Digits
  • Introduction
    • There is a difference between dimensions and units. A dimension is a measure of a physical variable (without numerical values), while a unit is a way to assign a number or measurement to that dimension.
    • For example, length is a dimension, but it is measured in units of feet (ft) or meters (m).
    • There are three primary unit systems in use today:
      • the International System of Units (SI units, from Le Systeme International d’Unites, more commonly simply called metric units)
      • the English Engineering System of Units (commonly called English units)
      • the British Gravitational System of Units (BG)
    • The latter two are similar, except for the choice of primary mass unit and use of the degree symbol, as discussed below.
  • Primary dimensions and units
    • In total, there are seven primary dimensions. Primary (sometimes called basic) dimensions are defined as independent or fundamental dimensions, from which other dimensions can be obtained.
    • The primary dimensions are: mass, length, time, temperature, electric current, amount of light, and amount of matter. For most mechanical and thermal science analyses, however, only the first four of these are required. The others will not be of concern to most mechanical engineering analyses.
    • In order to assign numbers to these primary dimensions, primary units must be assigned. These are listed in the table below for the three unit systems:
      Primary DimensionSymbolSI unitBG unitEnglish unit
      massm (sometimes M)kg (kilogram)sluglbm (pound-mass)
      lengthL (sometimes l)m (meter)ft (foot)ft (foot)
      timet (sometimes T)s (second)s (second)s (second)
      temperatureT (sometimes q )K (Kelvin)oR (degree Rankine)R (Rankine)
      electric currentI (sometimes i)A (ampere)A (ampere)A (ampere)
      amount of light
      (luminous intensity)
      C (sometimes I)c (candela)c (candela)c (candela)
      amount of mattern or N (sometimes )mol (mole)mol (mole)mol (mole)
    • All other dimensions can be derived as combinations of these seven primary dimensions. These are called secondary dimensions, with their corresponding secondary units. A few examples are given in the table below:
      Secondary DimensionSymbolSI unitBG unitEnglish unit
      forceF (sometimes f)N (Newton = kg× m/s2)lbf (pound-force)lbf (pound-force)
      accelerationam/s2ft/s2ft/s2
      pressurep or PN/m2, i.e. Pa (Pascal)lbf/ft2 (psf)lbf/in2 (psi) (note: 1 ft = 12 in)
      energyE (sometimes e)J (Joule = N× m)ft× lbf (foot pound)ft× lbf (foot pound)
      powerPW (watt = J/s)ft× lbf/sft× lbf/s
    • Note that there are many other units, both metric and English, in use today. For example, power is often expressed in units of Btu/hr, Btu/s, cal/s, ergs/s, or horsepower, in addition to the standard units of watt and ft× lbf/s. There are conversion factors listed in many textbooks to enable conversion from any of these units to any other.
  • Comment about the gravitational conversion constant, gc
    • Some authors define a gravitational conversion constant, gc, which is inserted into Newton’s second law of motion. I.e., instead of F = m× a, they write F = m× a/gc, where gc is defined in the English Engineering System of Units as

      and in SI units as
    • The present author discourages use of this constant, since it leads to much confusion. Instead, Newton’s law should remain in the fundamental form in which it was created, without an artificial constant thrown into the equation, simply for unit’s sake.
    • There has been much confusion (and numerical error!) because of the differences between lbf, lbm, and slug. The use of gc has complicated and further confused the issue, in this author’s opinion. The following is an attempt to clarify some of this confusion:
  • The relationship between force and mass units
    • The relationship between force, mass, and acceleration can be clearly understood with Newton’s second law. The following is provided to avoid confusion, especially with English units.
    • SI units:
      RelationshipNewton’s second law, F = m a. [Note: Bold notation indicates a vector.] By definition of the fundamental units, this yields 1 N = 1 kg× m/s2.
      Conversion
      DiscussionThe above expression is dimensionless and has a value of 1. Thus it is the conversion factor with which to multiply or divide any equation to simplify the units.
      ExampleHow much force (in Newtons) is required to accelerate a mass of 13.3 kg at a constant acceleration of 1.20 m/s2?

      Solution:

      to the right, since Fx is the x-component of vector F, and ax is the x-component of acceleration vector a.
      TerminologyIt is not proper to say that 1.00 kg equals 9.81 N, but it is proper to say that 1.00 kg weighs 9.81 N under standard earth gravity. This is obtained by utilizing Newton’s second law with gravitational acceleration, i.e.
      .
    • English units:
      RelationshipNewton’s second law, F = m a. [Note: Bold notation indicates a vector.] By definition of the fundamental units, this yields 1 lbf = 1 slug× ft/s2, or 1 lbf = 32.174 lbm× ft/s2.
      Conversionor or 
      DiscussionThe above expressions are dimensionless and each has a value of 1. Thus any of them can be considered a conversion factor with which to multiply or divide any equation to simplify the units.
      ExampleHow much force (in lbf) is required to accelerate a mass of 13.3 lbm at a constant acceleration of 1.20 ft/s2?

      Solution:

      to the right, since Fx is the x-component of vector F, and ax is the x-component of acceleration vector a.
      TerminologyIt is not proper to say that one lbm equals one lbf, but it is proper to say that one lbm weighs one lbf under standard earth gravity. This is obtained by utilizing Newton’s second law with gravitational acceleration, i.e.
      .
  • The Principle of Dimensional Homogeneity
    In any equation, each additive term must have the same dimensions. In simple terms, you cannot add apples and oranges.
    • Example - The area of a rectangle is the product of its width and its height, A = W H. The dimensions of both terms in this equation are {length2}. The equation A = H is clearly wrong, i.e. it is dimensionally inconsistent since the dimensions of the left term are {length2} while those of the right term are {length}.
    • The Principle of Dimensional Homogeneity is sometimes useful when checking the algebra of a problem solution. Namely, dimensional inconsistency in an equation is a sure sign of an algebraic error!
    • The Principle of Dimensional Homogeneity also extends to units. The best way to avoid unit errors is to list the units along with any numbers supplied to an equation. Also, it is best to introduce conversion factors in the form of ratios. In the above example, suppose the width W of the rectangle is 48.0 inches, and the Height H is 2.0 feet. The area A is desired in square feet, and is calculated correctly as follows:
      A = W H = (48.0 in) (2.0 ft) (1 ft / 12 in) = 8.0 ft2.


  • Significant Digits
    Since the proliferation of calculators in the 1970's, the concept of significant digits has been largely ignored. As a result, many students and practicing engineers today present answers to five, six, or more digits, even when only two or three digits are significant. Many students, for example, will write out every digit (perhaps eight or ten) that is displayed on their calculators, never even thinking about how many of those digits are actually meaningful. The present author encourages all students and engineers to consider significant digits in all written forms of communication - reports, papers, homework, exams, etc. Below is a discussion of the meaning and application of significant digits in engineering.
    • By default, an integer has an infinite number of significant digits. For example, the number 43 implies exactly 43, as when counting the number of students in a classroom. Unfortunately, many authors do not follow this convention, and it is unclear to the reader how many significant digits there really are, especially when there are trailing zeroes.
    • The number of significant digits is determined by the overall accuracy of a measurement. For example, suppose the diameter of a pipe is measured to be 2.53 mm. By convention, the measurement is only good to the least significant digit; here the micrometer is accurate to 0.01 mm, but the exact diameter may lie anywhere between 2.525 and 2.535 mm. In this example, the reading is good to three significant digits.
    • When considering the number of significant digits, leading zeros for numbers below unity do not count, but zeros within a value do count. For example, 0.367 has three significant digits - the leading zero does not count. Note that this same value can be written in exponential notation as 3.67 x 10-1, where the number of significant digits is more obvious. Consider the value 34.05. The zero here does count, so that the value has four significant digits.
    • Trailing zeroes are a little more tricky, especially when not using exponential notation. For example, suppose a pressure reading of 101,300 Pascals is given. It is not obvious how many (if any) of the trailing zeros are significant. Most likely, the pressure gage is only accurate to a hundred Pascals, so it is more appropriate to write this measurement as 101.3 kPa, avoiding the trailing zeroes altogether. The number of significant digits in this case is four. A reading of 101.30 kPa implies that the trailing zero is significant, and the total number of significant digits is five.
    • If trailing zeroes are significant, there are two ways to indicate this: First, use exponential notation, which clearly indicates the accuracy. For example, if a reading of 1000 is accurate to all four digits, one would write it as 1.000 x 103. Second, one can write "1000." as the numerical value. The decimal point at the end of the number indicates that all three zeros are significant. It is understood, then, that "1000." represents four significant digits of accuracy. In this same example, if only three digits are significant, one would write the value as 1.00 x 103. If exponential notation is not desired, but one still wishes to indicate the number of digits, one can write "1000 to three significant digits".
    • Here is an important rule to remember: When performing calculations or manipulations of several parameters, the final result is only as accurate as the least accurate parameter in the problem. For example, suppose A and B are multiplied to obtain C. If A = 2.3601 (five significant digits), and B = 0.34 (two significant digits), then C = 0.80 (only two digits are significant in the final result). Note that most students are tempted to write C = 0.802434, with six significant digits, since that is what is displayed on a calculator after multiplying these two numbers. Let's analyze this simple example carefully. Suppose the exact value of B is 0.33501, which is read by the instrument as 0.34. Also suppose A is exactly 2.3601, as measured by a more accurate instrument. In this case, C = A times B = 0.79066 to five significant digits. Note that our first answer, C = 0.80 is off by one digit in the second decimal place. Likewise, if B is 0.34499, read by the instrument as 0.34, the product of A and B would be 0.81421 to five significant digits. Our original answer of 0.80 is again off by one digit in the second decimal place. The main point here is that 0.80 (to two significant digits) is the best we can expect from this multiplication since, to begin with, one of the values had only two significant digits. Another way of looking at this is to say that beyond the first two digits in the answer, the rest of the digits are meaningless or not significant. For example, if one reports what his calculator displays, i.e. 2.3601 times 0.34 equals 0.802434, the last four digits are meaningless. As shown above, the final result may lie between 0.79 and 0.81 - any digits beyond the two significant digits are not only meaningless, but misleading, since it implies more accuracy to the reader than is really there.
    • Most electronic instruments are good to only three significant digits. When in doubt, for most engineering analyses, three digits are usually the maximum that can be expected.
    • When writing out intermediate results in a calculation, it is okay to record more digits than the number which is significant, as this can avoid round-off errors in subsequent calculations. However, when displaying the final answer, the number of significant digits should be taken into consideration.

STRONG NUCLEAR FORCE

The Strong Nuclear Force (also referred to as the strong force) is one of the four basic forces in nature (the others being gravity, the electromagnetic force, and the weak nuclear force). As its name implies, it is the strongest of the four. However, it also has the shortest range, meaning that particles must be extremely close before its effects are felt. Its main job is to hold together the subatomic particles of the nucleus (protons, which carry a positive charge, and neutrons, which carry no charge. These particles are collectively called nucleons). As most people learn in their science education, like charges repel (+ +, or - -), and unlike charges attract (+ -).
If you consider that the nucleus of all atoms except hydrogen contain more than one proton, and each proton carries a positive charge, then why would the nuclei of these atoms stay together? The protons must feel a repulsive force from the other neighboring protons. This is where the strong nuclear force comes in. The strong nuclear force is created between nucleons by the exchange of particles called mesons. This exchange can be likened to constantly hitting a ping-pong ball or a tennis ball back and forth between two people. As long as this meson exchange can happen, the strong force is able to hold the participating nucleons together.  The nucleons must be extremely close together in order for this exchange to happen. The distance required is about the diameter of a proton or a neutron. If a proton or neutron can get closer than this distance to another nucleon, the exchange of mesons can occur, and the particles will stick to each other. If they can't get that close, the strong force is too weak to make them stick together, and other competing forces (usually the electromagnetic force) can influence the particles to move apart. This is represented in the following graphic. The dotted line surrounding the nucleon being approached represents any electrostatic repulsion that might be present due to the charges of the nucleons/particles that are involved. A particle must be able to cross this barrier in order for the strong force to "glue" the particles together.
In the case of approaching protons/nuclei, the closer they get, the more they feel the repulsion from the other proton/nucleus (the electromagnetic force). As a result, in order to get two protons/nuclei close enough to begin exchanging mesons, they must be moving extremely fast (which means the temperature must be really high), and/or they must be under immense pressure so that they are forced to get close enough to allow the exchange of meson to create the strong force. Now, back to the nucleus. One thing that helps reduce the repulsion between protons within a nucleus is the presence of any neutrons. Since they have no charge they don't add to the repulsion already present, and they help separate the protons from each other so they don't feel as strong a repulsive force from any other nearby protons. Also, the neutrons are a source of more strong force for the nucleus since they participate in the meson exchange. These factors, coupled with the tight packing of protons in the nucleus so that they can exchange mesons creates enough strong force to overcome their mutual repulsion and force the nucleons to stay bound together. The preceding explanation shows the reason why it is easier to bombard a nucleus with neutrons than with protons. Since the neutrons have no charge, as they approach a positively charged nucleus they will not feel any repulsion. They therefore can easily "break" the electrostatic repulsion barrier to being exchanging mesons with the nucleus, thus becoming incorporated into it.